Conditions for Usable Media
This machine cannot print on every kind of media. When selecting media, be sure to carry out testing
in advance to make sure that satisfactory printing results are obtained.
Size
64-inch model 54-inch model
Width
*1
335 to 1,625 mm (13.2 to 64 in.) 295 to 1,371 mm (11.7 to 54 in.)
Cuttable media thickness
*1
0.08 to 0.22 mm (3.2 to 8.6 mil; depends on the material of the media)
Maximum media thickness (including back-
ing paper)
*1
When performing printing only: 1.0 mm (39.4 mil)
When performing cutting: 0.4 mm (15 mil)
Maximum roll outer diameter 250 mm (9.8 in.)
Paper tube (core) inner diameter 76.2 mm (3 in.) or 50.8 mm (2 in.)
*1 Applies to both roll and sheet media
Maximum Roll Weight
• 64-inch model: 45 kg (99 lb.)
• 54-inch model: 35 kg (77.2 lb.)
If using the take-up unit, this specification depends on the conditions of the take-up unit.
MEMO
Other Conditions
Media such as the following cannot be used.
• Media whose end is attached to the paper tube (core)
• Media that is severely warped or that has a strong tendency to reroll
• Media that cannot withstand the heat of the media heating system
• Media whose paper tube (core) is bent or crushed
• Media that bends under its own weight when loaded
• Media on a sagging roll
• Media that is rolled unevenly
About the Media Used
24 Basic Information
To Next Page
Loading...
