Roland TrueVIS VG3-540 - When Uneven Color Issues Occur with White Ink; Method for Ink Renewal Inside Damper

Method for Ink Renewal Inside Damper
If uneven color issues with white ink are not resolved even after shaking the pouch tray to mix the ink,
perform [Ink Renewal Inside Damper]. Uneven colors refers to the symptom of printed colors being un-
even (such as the color density being inconsistent) even when the same data is printed with the same set-
tings.
Ink renewal inside the damper can be used to stabilize the output colors by replacing the ink.
• Ink renewal inside the damper consumes a lot of ink, and overly frequent use may damage the print heads them-
selves. Avoid performing this operation more than necessary.
• When you perform ink renewal inside the damper, replace all ink other than C, M, Y, and K with new ink pouches. If
the ink runs out during cleaning, a [Cleaning Error (Ink Pouch Tray)] will occur and cleaning will stop.
• The ink pouches that you have removed can still be used in operations other than ink renewal inside the damper
(such as printing).
IMPORTANT
Procedure
1. Tap .
2. Tap [Maintenance]>[Ink Renewal Inside Damper].
3. Replace all ink other than C, M, Y, and K with new ink pouches.
P. 110Ink Pouch Replacement
4. Tap [Execute].
Cleaning will start. On completion, you will return to the original screen.
If [Discard the discharged fluid in the bottle.] appears after tapping [Execute]
MEMO
When Uneven Color Issues Occur with White Ink
256 Advanced Maintenance