Replacing the Blade
If the blade becomes dull, if the edge of the blade is chipped, or if the cutting quality is lowered, replace
the blade with a new blade.
Be sure to perform operations as specified by the instructions, and never touch any area not
specified in the instructions.
Sudden movement of the machine may cause injury.
WARNING
Never touch the tip of the knife.
Doing so may result in injury. The cutting performance of the blade will also be impaired.
CAUTION
Required item
Replacement blade
1. Replacing the Blade
Procedure
1. Remove any media.
2. Tap .
3. Tap [Maintenance]>[Blade Replacement].
The [Blade Replacement] screen appears.
4. Tap [Execute].
The cutting carriage moves to a position where blade replacement is possible.
5. When [Open the front cover.] appears, open the front cover.
The procedure is displayed on the operation panel.
• Tap or to check the procedure.
MEMO
Replacing the Blade/Separating Knife
276 Replacing Consumable Parts
To Next Page
Loading...
