Do the print heads come into contact with the media?
The height of the print heads may be too low. Also, if the media is not loaded and set up correctly, it may
wrinkle or come loose and contact the print heads.
RELATED LINKS
・ P. 157 Changing the Print Head Height
・ P. 32 Setup of New Media
・ P. 69 Setup of Registered Media
Are the print heads dirty?
The following may cause ink to drip on the media during printing.
• Buildup of fibrous dust (lint) around the heads
• Ink transferred to the heads due to rubbing against the media
If this happens, perform manual cleaning. We recommend carrying out periodic head cleaning.
• Too low humidity
Use the machine in an environment where the humidity is 35 to 80%RH (no condensation).
RELATED LINKS
・ P. 236 Cleaning around the Print Heads
Are the pinch rollers or the media clamps dirty?
Periodically clean them.
RELATED LINKS
・ P. 234 Cleaning the Machine
The media becomes soiled when printed
290 Output Quality Problems
To Next Page
Loading...
