Is the media wrinkled or warped?
Wrinkled or warped media may cause crop mark detection to fail. Avoid using wrinkled or warped media.
RELATED LINKS
・ P. 199 Correcting the Reading Sensor
Is the media size too large?
Large media may lead to large errors, which may cause crop mark detection to fail.
When you want to use lengthy media, we recommend performing output with the data separated into sizes
that are as short as possible.
Are you using media that is likely to reflect light?
The machine may not be able to read crop marks from media that is likely to reflect light. Try [Multi Sen-
sor Adjustment] (the correction function of the sensor for reading crop marks). If the crop marks still can-
not be read, change the media you are using.
RELATED LINKS
・ P. 199 Correcting the Reading Sensor
Are you using transparent media?
The machine cannot read crop marks from transparent media. Change the media you are using.
Automatic Detection of Crop Marks Fails
Problems in Cutting with Crop Marks 297
To Next Page
Loading...
