These are the main messages that appear on the machine's display to prompt correct operation. They do
not indicate any error. Follow the prompts and take action accordingly.
[When output, cleaning, and other operations are completed, discard the dis-
charged fluid.]
This message appears when a certain amount of discharged fluid collects in the drain bottle.
Tap [When output, cleaning, and other operations are completed, discard the discharged fluid.]>[Exe-
cute] to discard this fluid.
RELATED LINKS
・ P. 246 If the Discharged Fluid Disposal Message Appears
[The time for manual cleaning has arrived.]
This message appears when it is time to perform manual cleaning.
Tap [The time for manual cleaning has arrived.]>[Execute] to perform manual cleaning.
RELATED LINKS
・ P. 237 Manual Cleaning Method
[The time for wiper replacement has arrived.]
This message appears when it is time to replace the wiper.
Tap [The time for wiper replacement has arrived.]>[Execute] to replace the wiper.
RELATED LINKS
・ P. 270 Replacing the Wiper and the Tray Pad
[The time for wiper tray cleaning has arrived.]
This message appears when it is time to clean the wiper tray.
Tap [The time for wiper tray cleaning has arrived.]>[Execute] to clean the wiper tray.
RELATED LINKS
・ P. 273 Cleaning the Wiper Tray
[Print head protection mode has activated.]
This message appears when the ink in use may not be a product specified by Roland DG Corporation.
If the ink is not a product specified by Roland DG Corporation, a larger amount of ink will be consumed,
and drying will be performed frequently. To obtain optimal performance, we recommend that you use ink
specified by Roland DG Corporation. To purchase ink, contact your authorized Roland DG Corporation deal-
er.
Messages
Messages on the Operation Panel 315
To Next Page
Loading...
