Roland U-20 - You Play

n
BEFORE
YOU
PLAY
1 .
Connections
Connect the
rear panel
MIX
OUT jacks
to
the input
jacks
of a
keyboard amp
or
mixer.
When playing
in
stereo, use
the
L and R
jacks.
When
playing
in mono,
use only
the
L (MONO)
jack.
Before
making
connections,
make sure
that the
power
switches
of the U-20
and
the amp are
off.
When using
headphones,
insert the
headphone plug
into
the
PHONES jack.
Pedal Switch
(DP-a DP^,
ate)
Expression Pedal
CEV-^
EV-10. etc)
Stereo Amp
*The U-20
does not
contain a
built-in
power amp
or
spaalcer.
and will
not make
sound by
itself.
*
When
sinipped, the U-20
is set
so that
no
sound
appears at
the
DIRECT
OUT jacks.
*When connecting
the U-20
directly to a
stereo system,
be
careful
of the output level.
Excessively high
levels can
damage
the speakers etc.
of the
stereo
system.
*
To take full
advantage of
the U-20,
we
suggest
that you
play
it in
stereo.
10