Roland UA-30 - Save

31
Basic operation for Cool Edit Pro LE
3
Play the external audio device, and adjust the input level. If the input level is
excessive and clipping occurs, the clip indicator at the right of the level
meter will light. In this case, lower the volume of the audio device so that the
maximum level does not exceed 0dB. The clip indicator will go dark when
you click it.
fig.4-7
4
Finally, click to cancel monitoring.
■ Record
When you have completed the preparations, use the following procedure to
record.
1
Click .
2
Play your audio device.
3
When you have finished playing, click .
Save
Use the following procedure to save the audio data.
1
In the File menu, click Save As.
2
In the Save Waveform As dialog box, specify the Save in and Save as
type.
3
Input the file name, and click [Save].
If you change the position
of the Sample rate select
switch or the Recording
input select switch, you
must first exit all
applications including the
UA-30 D-Out Smoother
(p. 37). You should also
turn down the volume of
any audio amp system
that is connected.