6
Connection Using RS-232
This shows you how to use an RS-232 cable to directly connect your computer to the V-160HD.
V-160HD
1. Using an RS-232 cable, connect the RS-232 connector on
the V-160HD to the computer.
Communication standards
Communication
method
Synchronous (asynchronous), full-
duplex
Communication speed 115,200 bps
Parity none
Data length 8 bits
Stop bit 1 bit
Code set ASCII
Flow control XON/XOFF
2. Turn on the power to the V-160HD.
Computer
1. Launch the V-160HD RCS app.
2. Click the CONNECT [SETUP] button.
3. Select the “RS-232.”
4. Select the “PORT,” and click the [CONNECT] button.
PORT
From the drop-down list, select the port where the
V-60HD is connected.
When the status icon changes to “RS-232,” the device is connected.
To Next Page
Loading...
