11
Panel Descriptions
16.SYSTEM Button
Press this button when making adjustments for the V-
Bass to be used in various situations (p. 31, 35–42).
17.MANUAL Button
Press this button to use the MANUAL MODE (p. 32).
18.TUNER/BYPASS Button
Press this button to use the TUNER function, or the
BYPASS function (p. 18).
19.BANK Pedal
Press these pedals to switch patch banks, or patches (p. 19).
20.Number Pedals
Press these pedals to switch patches (p. 19), or to switch
effects On/Off (p. 32).
21.CTL (Control) Pedal
Use this pedal to control the variety of functions, such as
On/Off for effects, TUNER switch, and others (p. 24).
22.EXP (Expression) Pedal
Use this pedal to control the volume, wah effect, and
others (p. 24).
When operating the expression pedal, be careful not to
get your toes pinched between the moving part and the
panel. In households with small children, an adult should
provide supervision until the child is capable of following
all the rules essential for its safe use. Children should use
this unit under adult supervision and guidance.
Rear Panel
fig.0-02
23.OUTPUT Jacks (XLR)
These are XLR type connectors that provide balanced
output.
24.SELECT (Output Select) Switch
This switch setting determines whether the signals
output from the OUTPUT jacks (XLR) are in stereo (L/
R), or as DIRECT/MONO output.
DIRECT:
Outputs the normal pickup signal from the GK
INPUT, or the signal from the BASS INPUT.
MONO: Outputs the mixed signal of the OUTPUT L/R.
25.GK INPUT Connector
Connect the included GK cable to input signals from
each string.
26.BASS INPUT Jack
Use this jack to input the normal bass pickup signals.
27.BASS OUTPUT Jack
This jack directly outputs the signal from the BASS INPUT.
28.OUTPUT Jack
These are standard jacks that output unbalanced signals.
29.PHONES (Headphones) Jack
A pair of stereo headphones can be connected to this jack.
30.SUB EXP PEDAL/SUB CTL 1,2
(Sub Expression/Sub Control Pedal) Jacks
Connect an optional expression pedal (such as the EV-5)
or foot switch (such as the FS-5U) here.
31.MIDI Connectors
Connect an external MIDI device to these connectors to
transmit and receive MIDI messages.
32.POWER Switch
Switches the power to the on and off.
33.AC Inlet
Connect the included power cord.
25 26 2724 29 30 32 33
23 28 31
To Next Page
Loading...
