67
Chapter 5. Parameter guide
Chapter 5
Specifies how the tuner function will operate.
PITCH
435Hz–445Hz
Specify the standard pitch. Effects that are controlled by an
input pitch will operate according to the pitch you specify
here.
* At the factory settings this is set to “440 Hz.”
BYPASS
Select the sound while you are tuning.
* This was set to “GK” when the unit was shipped from the
factory.
Here you can make settings for the divided pickup.
SETTING
A, B, C, D, E
You can make up to five separate sets of GK settings. If you
use more than one bass, it is convenient to store a separate set
of settings for each bass.
TYPE
Specify the type of divided pickup that is installed on the
bass you are using.
GK POSITION
Specify the location in which the divided pickup is installed.
4STR-1:
fig.5-01
4STR-2:
fig.5-02
4STR-3:
fig.5-03
5STR-Lo1:
fig.5-04
TUNER/BYPASS
MUTE The sound will be muted.
GK Outputs the sound of the GK pickup.
BASS IN Outputs the sound of the normal pickup.
GK SETTING
(GK PICKUP SETTINGS)
GK-2B Select this if your divided pickup is a GK-2B.
PIEZO1 Select one of these if your divided pickup is a pi-
ezo-type. Select a type that matches your bass to
produce the best COSM BASS sound.
PIEZO2
To Next Page
Loading...
