Roland V-Drums TD-30 - Instrument Edit Screens (TOM, HI-HAT)

Instrument
58
TOM
Parameter Value Explanation
[F1] (SHELL) button
Shell Depth
NORMAL,
DEEP1–2
Depth of the shell
[F2] (HEAD) button
Head Type
CLEAR, COATED,
PINSTRIPE
Type of head
Head Tuning -480–+480 Tuning of the head
[F3] (MUFFLE) button
Muing
OFF, TAPE1–2,
FELT1–2
Muing (muting) setting
Snare Buzz OFF, 1–8 Resonance to the snare
[F4] (MIC) button
Mic Position
OUTSIDE4–1,
STANDARD,
INSIDE1–4
Tonal change caused by
microphone position
HI-HAT
Parameter Value Explanation
[F1] (SIZE) button
Size 1"–40" Hi-hat diameter
[F2] (ADD) button
Add Sound
OFF, TAMBOURINE,
CABASA,
COWBELL
Allows you to add
tambourine, cabasa, or
cowbell to the hi-hat. The
percussion groove will be
added to the hi-hat.
Level -3–+3
Adjusts the volume
balance of the added
sound.
[F3] (FIXED) button
Fixed Hi-Hat
NORMAL
The openness will be
controlled by the pedal.
FIXED1–4
The openness will be
xed.
[F4] (MIC) button
Mic Position
OUTSIDE2–1,
STANDARD,
INSIDE1–2
Tonal change caused by
microphone position
* For some instruments, Mic Position cannot be edited.
MEMO
The closed hi-hat position (Fixed Hi-Hat = FIXED2)
can be enabled by pressing an optional footswitch
or hitting a pad switch. Please refer to “Assigning a
Function to a Footswitch or Pad (CONTROL)” (p. 117).