81
Here you can make settings for the tempo and click.
Specifying the Tempo
1. Press the [TEMPO] button.
The [TEMPO] button will light, and the TEMPO screen will
appear.
Button Explanation
[F1] (CLICK) button Make click settings (p. 82).
[F2] (SYNC) button
Specify synchronization with
external MIDI devices (p. 84).
[F3] (TAP) button
Specify the tempo by striking a pad
or button.
[F4] button
Make the [TEMPO] button blink in
time with the tempo (p. 82).
[F5] button Sound the click (p. 82).
2. Use the [–] [+] buttons or the dial to select the
tempo.
Value 20–260
4. Press the [EXIT] button to return to the DRUM
KIT screen.
Setting the Tempo by Hitting a
Pad (TAP)
You can set the tempo by hitting a pad or the [PREVIEW]
button two or more times at quarter-note intervals of the
desired tempo.
1. Press the [TEMPO] button.
The [TEMPO] button will light, and the TEMPO screen will
appear.
2. Press the [F3] (TAP) button.
The TAP TEMPO screen will appear.
3. Press the cursor [ ] button to move the cursor
to Tap Switch.
4. Use the [–] [+] buttons or the dial to set to “ON.”
5. Press the cursor [ ] button to move the cursor
to Tap Pad.
6. Use the [–] [+] buttons or the dial to select the
pad (or the [PREVIEW] button) to use for Tap
Tempo function.
7. Press the [EXIT] button to return to the TEMPO
screen.
When you strike the pad selected in step 6 (or the
[PREVIEW] button) two or more times, the tempo will
change to the corresponding interval.
Tempo
AppendicesExpansionSettingsPerformanceSetupOverview
To Next Page
Loading...
