Roland V-Drums TD-30 - Viewing the Tempo as a Blinking Button; Sounding a Click; Making Click Settings (CLICK)

Tempo
82
Viewing the Tempo as a Blinking
Button
You can make the [TEMPO] button blink in time with the
tempo.
1. Press the [TEMPO] button.
The [TEMPO] button will light, and the TEMPO screen will
appear.
2. Press the [F4] button to turn the [TEMPO] button
ashing (ON) or going o (OFF).
3. Press the [EXIT] button to return to the DRUM
KIT screen.
Sounding a Click
1. Press the [TEMPO] button.
The [TEMPO] button will light, and the TEMPO screen will
appear.
2. Each time you press the [F5] button, the setting
will alternate between sounding the click (ON)
and not sounding it (OFF).
3. Press the [EXIT] button to return to the DRUM
KIT screen.
MEMO
You can also turn the click on/o by holding down
the [SHIFT] button and pressing the [TEMPO] button.
Making Click Settings (CLICK)
1. Press the [TEMPO] button.
The [TEMPO] button will light, and the TEMPO screen will
appear.
2. Press the [F1] (CLICK) button.
The CLICK SETTINGS screen will appear.
3. Use the [F1]–[F3] buttons to select the parameter
you want to set.
4. Use the cursor buttons to select the parameter.
5. Use the [–] [+] buttons or the dial to make
settings.