Roland V-Drums TD-50X - Editing a Drum Kit (MENU); Setting the Volume; Setting the Illumination Colors for the [KIT] Button and Knobs; Changing a Drum Kit Name

36
Customizing the Kits
Editing a Drum Kit
(MENU)
This shows how to set the drum kit volume, the illumination colors for
the controllers and so on.
&
For details on the parameters that can be edited, refer to
“Controlling the Changes in the Sound” (p. 38) and “Data List”
(PDF).
1. In the DRUM KIT screen (p. 16), press the [F5] (MENU)
button.
The menu screen appears.
2. Edit the drum kit settings.
3. Press the [KIT] button to return to the DRUM KIT screen.
Setting the Volume
Here’s how to set the drum kit volume.
1. In the DRUM KIT screen (p. 16), press the [F5] (MENU)
button.
2. Press the PAGE [UP] button to display the topmost
page.
The KIT SETTINGS screen appears.
3. Press the [F1] (VOLUME) button.
4. Use the [-] [+] buttons or the dial to edit the value.
Value -INF–+6.0dB
Setting the Illumination Colors for the [KIT]
Button and Knobs
For each drum kit, you can change the illumination color of the [KIT]
button and knobs.
This helps to distinguish between drum kits. For example, you could
assign dierent colors to drum kits of dierent genres, or use the color
as a guide when editing instruments.
1. In the KIT SETTINGS screen, press the [F2] (COLOR)
button.
2. Use the cursor buttons to select the illumination color.
Value 1–10
Changing a Drum Kit Name
Here’s how to rename the currently selected drum kit.
1. In the KIT SETTINGS screen, press the [F4] (NAME)
button.
The KIT NAME screen appears.
2. Edit the name.
You can enter a kit name (upper line) of up to 12 characters, and a
sub-name (lower line) of up to 16 characters.
Controller Explanation
Cursor buttons
Move the cursor to the character that
you want to change.
[-] [+] buttons, dial Edits the character.
[R1] (ABC) knob Selects upper case input.
[R2] (abc) knob Selects lower case input.
[R3] (123) knob Selects numerical input.
[F2] (FONT CHANGE)
button
Each time you press this, the
appearance (font) of the kit name (top
row) on the DRUM KIT screen changes
(p. 37).
[F3] (INSERT) button Inserts a space at the cursor location.
[F4] (DELETE) button
Deletes the character at the cursor
location.
3. Press the [F5] (EXIT) button to exit the KIT NAME
screen.