Roland V-Drums TD-50X - Important Notes; Power Supply and Interference; Placement and Maintenance; Data Handling and Precautions

4
Getting Ready
An Overview of the TD-50X
Drum Kits
On the TD-50X, the sounds that play when you strike each pad are called “instruments.” A set of instruments allocated to the respective pads is
called a “drum kit.”
Drum kit 100
Drum kit 1
Pads
Expansion 1
(AUX 1)
HEAD
RIM
Expansion 3
(AUX 3)
HEAD
RIM
Expansion 2
(AUX 2)
HEAD
RIM
Expansion 4
(AUX 4)
HEAD
RIM
Floor tom
(TOM 4)
HEAD
RIM
Hi-hat cymbal
(HI-HAT)
HEAD (bow)
RIM (edge)
Crash cymbal 1
(CRASH 1)
HEAD (bow)
RIM (edge)
Crash cymbal 2
(CRASH 2)
HEAD (bow)
RIM (edge)
Ride cymbal
(RIDE)
HEAD (bow)
RIM (edge)
BELL
Snare drum
(SNARE)
HEAD
RIM
High tom
(TOM 1)
HEAD
RIM
Middle tom
(TOM 2)
HEAD
RIM
Low tom
(TOM 3)
HEAD
RIM
Bass drum
(KICK)
HEAD
Ambience settings
Overhead mics for the drum kit overall,
performance location, etc.
Mixer settings
Multi-eect, master compressor, master
equalizer, etc.
Overall settings for the
entire drum kit
Overall drum kit volume, drum kit name,
MIDI settings, etc.
Pad settings
Pad compressor, etc.
Overall instrument settings (head)
Volume, pan, pad equalizer, how the sub-instrument is played, etc.
Instruments
Instrument sounds, transients, etc.
Sub-instruments
Instrument sounds, transients, etc.
Overall instrument settings (rim)
MEMO
5
When you change a drum kit setting, the changed setting is saved automatically.
5
For details on the parameter conguration of the drum kits, please refer to the “Data List” (PDF).
Instruments
(p. 28)
The snare drum, kick drum and other instrument sounds are referred
to as “instruments.”
You can allocate dierent instruments to the head, rim and other parts
of each pad.
Create the sound you like by modifying the settings of each
instrument. With the instruments, you can recreate the changes in
sound from dierent depths of drum shells, add transient eects and
change the sound in other ways.
Also, audio les that you created on your computer can be imported
from an SD card into the TD-50X, and played as instruments (with the
User Sample function).
Ambience
(p. 32)
“Ambience” is an eect that recreates the reverberations of a
performance space.
You can adjust the overhead mic sound (which picks up the overall
sound of the drum kit), the room ambience and the reverb (room type
and size, reverberation sound, etc.).
Ambience can be applied individually for each drum kit. You can also
set how much eect is applied for each pad.
Mixer
(p. 32)
This sets the volume balance, pan, eects and so on for each pad.
The TD-50X features the following eect types. Some of these can be
applied per pad, and some are applied to the entire drum kit.
Eects Explanation
Pad equalizer/
Pad compressor
(PAD EQ/PAD COMP)
Use the equalizer to adjust the sound balance for
each frequency range, divided into high, middle,
low range and so on.
Use the compressor to suppress peaks in volume
by adjusting the attack and sound pressure.
With the pad equalizer, you can apply the eect
dierently per pad zone; and with the pad
compressor, you can apply the eect for each
individual pad.
Multi-eect
(MFX)
With the multi-eect, you can select and apply
three eects from a total of 38 eect types.
The multi-eect can be applied individually for
each drum kit. You can also set how much eect is
applied for each pad.
Master compressor/
Master EQ
(MASTER COMP/MASTER EQ)
This lets you apply compressor and equalizer
eects to the entire drum kit.