Roland V-Drums TD-50X - Recording; Recording and Playback of Performances; Recording Performances with Songs

20
Recording
Recording a Performance
You can easily record your own performance and play it back.
* If you want to record on an SD card, you must rst insert an SD card
(p. 7).
Recording
1. In the DRUM KIT screen (p. 15), press the [t]
button.
The RECORDER screen appears; the TD-50X is in record-standby
condition.
MEMO
If you want to record along with a click, sound the click (p. 16).
2. Use the [F5] button to select “DRUM only.”
3. Turn the [R1] knob to select the recording
destination.
Display Explanation
TEMPORARY
Record onto the TD-50X’s temporary area
(one song).
The data recorded to TEMPORARY can also
be copied to an SD card. For details, refer to
“Reference Manual” (PDF).
* The recorded data in the TEMPORARY area
disappears when you turn o the power.
SD#01–99
Record onto the SD card (99 songs).
* You can’t select this unless an SD card is
inserted in the TD-50X.
MEMO
If it is OK to overwrite a recording destination that already
contains recorded data, turn the [R2] knob to add a check mark to
“Overwrite.” If the check mark is cleared, previously-recorded data
will not be accidentally overwritten.
4. Press the [s] button to start recording.
5. Press the [s] button once again to stop recording.
Playback
6. Press the [s] button.
The recorded performance plays back.
MEMO
You can also turn the [R1] knob to select another recorded song.
7. Press the [s] button to stop playback.
Recording Your Performance Along with a Song
You can record your performance along with a song.
Recording
1. Select the song (p. 16).
2. Press the [t] button.
The RECORDER screen appears; the TD-50X is in record-standby
condition.
3. Use the [F5] button to select “with SONG.”
You can select “with SONG” only for audio le songs.
4. Turn the [R1] knob to select the recording
destination.
MEMO
If it is OK to overwrite a recording destination that already
contains recorded data, turn the [R2] knob to add a check mark to
“Overwrite.” If the check mark is cleared, previously-recorded data
will not be accidentally overwritten.
5. Press the [s] button to start recording.
The TD-50X starts recording and the song starts playing.
6. Press the [s] button once again to stop recording.
Playback
7. The recorded performance plays back.
You can export your recording to the SD card
A song recorded on the TD-50X can be exported as audio data
or SMF to an SD card; in the SONG screen (REC DATA tab), press
the [F4] (EXPORT) button. For details, refer to “Reference Manual”
(PDF).