The World’s Finest Electronic Drums and Percussion. PERIOD.
40
Reinitializing the TD-6/6V
➜ Hold [Shift] (1), Press [Edit/Setup] (2)
➜ Release the Buttons
➜ Press the [Right Cursor] (3) 6x to “Factory Reset”
➜ Press [Enter] (4) 3x
1
4
3
2
Reinitializing the TD-3
Reinitializing the TD-8
➜ With the power off, press and hold down
the [-] (A) and [+] (B) buttons
➜ With the buttons still depressed
Power on the TD-3
➜ The display will read "rSt"
➜ Release the buttons
➜ Press the [DRUM KIT] button for a few seconds
➜ Wait for the LED's nish scrolling across the
face of the TD-3
C
C
A
A
B
B
➜ Press the [Setup] (A) 1x
➜ Press the [Cursor Down] button (B) until the
menu above [F3] (C) reads “Reset”
➜ Press [F3] (C) 3x.
Remember, [Setup],
cursor down to “Reset”,
then [F3] three times.
To Next Page
Loading...
