Roland V-Mixer VM-3100 - Page 15

17 SCENE MEMORY
Use the SCENE 1 - SCENE 4 buttons to store the current
mixer configuration. The VM-3100 contains 8 banks of
scenes, each containing 4 scenes. You can switch among
Banks 1-8 by pressing the BANK button and record four
Scenes within each bank (refer to p. 26 in this manual).
This switching feature can also be used as a locator
function.
18 Transport Buttons
The transport buttons can be used to operate an external
MIDI sequencers.
Rear Panel
1 AC IN Jack
Make sure you turn down the volume of external
amplification before powering the Mixer on or off.
3 RMDB II Connector (VM-3100Pro only)
This is a multichannel digital 1/O connector. The
optional Roland DIF-AT can be connected.
4 DIGITAL I/O Connectors
C DSTALT OT)
78 6
OUTB INB OUTA INA
S/P DIF digital input/output format MD players and
DAT recorders can be connected here. These connectors
provide high-quality sound for playback and recording.
*
Digital signals from MD and CD players cannot be input
merely by connecting these devices to the DIGITAL
connectors. Please refer to p. 20 for instructions on making
the necessary settings.
* Coaxial connectors cannot be used to input or output
analog signals.
5 FOOT SWITCH Jack
FOOT
SWITCH
You can use a foot switch connected here to select
Scenes or carry out other operations.
6 MIDI I/O Connectors
MiDL__
OuT THRU IN
: :
An external MIDI device can be connected here,
allowing you to use the mixer to control, for example, a
MIDI sequencer, or to select a VM-3100 Scene froma
MIDI keyboard.
15
USING THE UNIT SAFELY
“IMPORTANT NOTES. ele,
A
Rc]
iy a
aa
a
°
S
4
&
Ss
>
2
+
k]
pd
@
s
V-Mixing Station?
Pan Names
Trying Out the VM-3100
Digital Mixer Workbook
a
fig
io
Bsa
i=
a
a
a
<q