6-14
Others
Explain to refer to the User's Manual when an error message is displayed. And also explain to switch off and on
the machine and check what happens before calling for inquiry when [SERVICE CALL] is displayed, since it occasionally
solves the problem just by restarting.
Explain the procedure of capping the print heads referring to the User's Manual [If the Heads Still Do Not Move]. When
the print carriage does not return to the standby position, capping needs to be done manually by user.
Consumable Parts and
Replacement Cycle
Parts Name Replacement Cycle
Print Head 6 billion shots / nozzle (6,000,000 kshots)
Wiper Wiping 3000 times
Felt Wiper Wiping 800 times
Wiper Scraper 12 months
Cap Top 6 months
Scan Motor 3000 hours
Ink Tube 3000 hours
Sponge for Wipers Replace it appropriately diagnosing from the appearance of it
Lithium Battery 24 months
Cutter Protection Replace it depending on the scratches
Pinch Roller Replace it depending on the wear of the rubber part
To Next Page
Loading...
