Roland VersaStudio BN-20 - Main Specifications; Maximum Area; Maximum Area When Using Crop Marks

98
Chapter 4 Appendix Chapter 4 Appendix
Main Specications
Maximum Area
The printing or cutting area along the horizontal plane (the direction in which the carriages move) is deter-
mined by the position of the pinch rollers.
Maximum Area When Using Crop Marks
Crop mark
10 mm
(0.39 in.)
12.5 mm
(0.49 in.)
10 mm
(0.39 in.)
12.5 mm
(0.49 in.)
12.5 mm
(0.49 in.)
10 mm
(0.39 in.)
12.5 mm
(0.49 in.)
10 mm
(0.39 in.)
Printing or cutting area
Maximum area
Printing or cutting area
Left side pinch
roller
5 mm
(0.2 in.)
Max. 24,998 mm
(984.17 in.)
Printing or cutting coordinates origin
Max. 480 mm
(18.9 in.)
Right side
pinch roller
1.4 mm
(0.1 in.)
5 mm
(0.2 in.)
1.4 mm
(0.1 in.)