Roland VersaStudio BN-20 - Specifications

Main Specications
Chapter 4 Appendix
101
Chapter 4 Appendix
Specications
BN-20
Printing technology Piezoelectric inkjet
Media Width(*1) 150 to 515 mm (5.9 to 20.3 in.)
Thickness Maximum 1.0 mm (39 mil) with liner, for printing
Maximum 0.4 mm (16 mil) with liner and 0.22 mm (9 mil) without
liner, for cutting
Roll outer diameter Maximum 150 mm (5.9 in.)
Roll weight Maximum 6 kg (13.2 lb.)
Core diameter 76.2 mm (3 in.) or 50.8 mm (2 in.)
Printing/cutting width (*2) Maximum 480 mm (18.9 in.)
Ink cartridges Types ECO-SOL MAX: 220-cc cartridge
AQUEOUS PIGMENT ink (FPG) 220-cc cartridge
Colors Five colors (cyan, magenta, yellow, black, metallic silver)
Four colors (cyan, magenta, yellow, and black
(Five colors is only ECO-SOL MAX)
Printing resolution (dots per inch) Maximum 1,440 dpi
Cutting blade Type Roland CAMM-1 series compatible
Blade oset 0.25 mm (9 mil)
Cutting speed 1 to 15 cm/s
Blade force 30 to 300 gf
Software resolution (when cutting) 0.025 mm/step
Distance accuracy (when printing) (*3) (*4) Error of less than ±0.3% of distance traveled, or ±0.3 mm, whichever
is greater
Distance accuracy (when cutting) (*3) (*5) Error of less than ±0.4% of distance traveled, or ±0.3 mm, whichever
is greater
Repeatability (when cutting) (*3) (*6) ±0.1 mm or less
Alignment accuracy for printing and cutting
(*3) (*7)
±0.5 mm or less
Alignment accuracy for printing and cutting
when reloading media (*3) (*8)
Error of less than ±0.5% of distance traveled, or ±3 mm, whichever
is greater
Print heater (*9) Temperature: 35°C (95 °F) (xed)
Connectivity USB (compliant with Universal Serial Bus Specication Revision 2.0)
Power-saving function Automatic sleep feature
Power requirements AC 100 to 240 V ±10 %, 1.0 A, 50 / 60 Hz
Power consumption During operation Approx. 90 W
Sleep mode Approx. 5.5 W
Acoustic noise level During operation 62 dB (A) or less
During standby 42 dB (A) or less
Dimensions 1009 (W) x 582 (D) x 293 (H) mm (39.7 (W) x 22.9 (D) x 11.5 (H) in.)
Weigh 36 kg (79.4 lb.)
Installation Environ-
ment
Power on (*10) Temperature: 20 to 32°C (68 to 90 °F), humidity: 35 to 80%RH (non-
condensing)
Power o Temperature: 5 to 40°C (41 to 104°F), humidity: 20 to 80%RH (non-
condensing)
Accessories Power cord, USB cable, blade, blade holder, Roland Software Pack-
age, Software RIP
(Roland VersaWorks), User's Manual,etc.