Roland VersaStudio BN-20 - Cutting; Printing & Cutting; Adjusting Cutting

28
Chapter 2 Fully Utilizing the Machine
Chapter 2 Fully Utilizing the Machine
Cutting / Printing & Cutting
Adjusting cutting
Adjust the cutting conditions to obtain beautiful razor sharp cut lines. Making adjustments to suit the media
thickness.
Procedure

Load the media to be cut.
 P. 14, "STEP1: Loading Media"

Open the Utility window.
 P. 7, “How to Open the Utility Window / Exit the Utility”

Click [Cut Adjustment].

Click [Test Cut].
Test cutting is performed.