Procedure
1. Open the Utility window.
P. 11 "How to Open the Utility Window / Exit the Utility"
2. In the [Option] tab, click [Head Wash].
Carry forward the work by following the instructions displayed on the screen. Do not switch off
power during operation until the work is completed.
3. Move as soon as possible.
4. Immediately reinstall the machine and fill with ink.
See "Preparation Before Use" and promptly fill with ink.
IMPORTANT
Important Notes on Moving
• Once the preparations for moving are complete, move the machine and fill it with ink with as little delay
as possible. Allowing the machine to stand without ink may damage the print heads.
• When moving the machine, keep it at a temperature between 5 to 40˚C (41 to 104˚F) and at relative hu-
midity between 20 to 80% (with no condensation). Failure to do so may result in breakdown.
• Handle the machine with care when moving, keeping it level (not tilted at an angle) and preventing it
from striking other objects.
Procedures from Preparing to Move Through Re-
installing
Operations When Moving the Unit 111
To Next Page
Loading...
