Roland VersaSTUDIO BN-20A - Specifications

BN-20A
Printing technology Piezoelectric inkjet
Media
Width
*1
150 to 515 mm (5.9 to 20.3 in.)
Thickness Maximum 1.0 mm (39 mil) with liner, for printing
Maximum 0.4 mm (16 mil) with liner and 0.22 mm (9 mil) without liner, for
cutting
Roll outer diameter Maximum 150 mm (5.9 in.)
Roll weight Maximum 6 kg (13.2 lb.)
Core diameter 76.2 mm (3 in.) or 50.8 mm (2 in.)
Printing/cutting width
*2
Maximum 480 mm (18.9 in.)
Ink cartridges Types 220-cc cartridge
Colors Four colors (cyan, magenta, yellow, and black)
Printing resolution (dots per inch) Maximum 1,440 dpi
Cutting blade Type Roland CAMM-1 series compatible
Blade offset 0.25 mm (9 mil)
Cutting speed 1 to 15 cm/s
Blade force 30 to 300 gf
Software resolution (when cutting) 0.025 mm/step
Distance accuracy (when printing)
*4
Error of less than ±0.3% of distance traveled, or ±0.3 mm, whichever is
greater
Distance accuracy (when cutting)
*3*5
Error of less than ±0.4% of distance traveled, or ±0.3 mm, whichever is
greater
Repeatability (when cutting)
*3*6
±0.1 mm or less
Alignment accuracy for printing and cutting
*3*7
±0.5 mm or less
Alignment accuracy for printing and cutting when
reloading media
*3*8
Error of less than ±0.5% of distance traveled, or ±3 mm, whichever is great-
er
Print heater
*9
Temperature: 35 °C (95 °F) (fixed)
Connectivity USB (compliant with Universal Serial Bus Specification Revision 2.0)
Power-saving function Automatic sleep feature
Power requirements AC 100 to 240 V ±10 %, 1.0 A, 50 / 60 Hz
Power consumption During operation Approx. 90 W
Sleep mode Approx. 5.5 W
Acoustic noise level During operation 62 dB (A) or less
During standby 42 dB (A) or less
Dimensions 1009 (W) x 582 (D) x 293 (H) mm (39.7 (W) x 22.9 (D) x 11.5 (H) in.)
Weight 36 kg (79.4 lb.)
Installation Environ-
ment
Power on
*10
Temperature: 20 to 32 °C (68 to 90 °F)
Humidity: 35 to 80 %RH (non-condensing)
Power off Temperature: 5 to 40 °C (41 to 104 °F)
Humidity: 20 to 80 %RH (non-condensing)
Accessories Power cord, USB cable, blade, blade holder, User's Manual, etc.
*1 It must be within the ranges shown below:
• 150 to 170 mm (5.9 to 6.7 inch)
• 200 to 235 mm (7.9 to 9.3 inch)
• 287 to 322 mm (11.3 to 12.7 inch)
Specifications
Main Specifications 117