• 348 to 383 mm (13.7 to 15.1 inch)
• 393 to 429 mm (15.5 to 16.9 inch)
• 439 to 474 mm (17.3 to 18.7 inch)
• 487 to 515 mm (19.2 to 20.3 inch)
*2 The length of printing or cutting is subject to the limitations of the program.
*3 • Media type: Media specified by Roland DG Corp.
• Temperature: 25 °C (77 °F), humidity: 50%
• Roll media must be loaded correctly.
• Front margin: 35 mm or more
• Excluding expansion/contraction of the media
• All correction or adjustment function of this machine has been made properly.
*4 With Roland PET film, print travel: 1 m
*5 Range for assured repetition accuracy: Length 1,000 mm
*6 Range for assured repetition accuracy : Length 1,000 mm
*7 • Provided that media length is under 1,000 mm
• Excludes the effects of slanted movement and of expansion and contraction of the media.
*8 • Data size : 1,000 mm in the media-feed direction, 480 mm in the carriage-movement direction
• No lamination
• Automatic detection of crop marks at 4 points when media is reloaded.
• Excluding possible shift caused by expansion/contraction of the media and/or by reloading the media.
*9 • Warm-up is required after power up. This may require 5 to 20 minutes, depending on the operating environment.
• Depending on the ambient temperature and media width, the temperature may fail to be reached 35 (°F).
*10 Operating environment
①: Use in an operating environment with this range.
Specifications
118 Main Specifications
To Next Page
Loading...
