Adjusting printing and cutting
When printing and cutting at the same time, adjust and align the printing and cutting positions. De-
pending on the media thickness, sometimes printing and cutting positions are very slightly out of align-
ment. It is recommended to set correction values to suit the media.
Procedure
1. Load the media to be cut.
P. 20 "Step 1: Loading Media"
2. Open the Utility window.
P. 11 "How to Open the Utility Window / Exit the Utility"
3. Click [Print and Cut Adjustment].
4. Click [Print and Cut Pattern].
The test pattern is printed.
5. Follow the on-screen instructions and enter the values for [New Scanning Value] and [New Feeding
Value].
6. Click [Apply].
The values in [New Scanning Value] and [New Feeding Value] change to "0."
7. Click [Close].
Cutting / Printing and Cutting
Optimizing the Output Quality 41
To Next Page
Loading...
