Crop Cut Adjustment
Depending on the composition of the media, the positioning of printing and cutting may be misaligned
even when you're using crop marks. Make corrections for misaligned printing and cutting for the media
you're using.
Procedure
1. Open the Utility window.
P. 11 "How to Open the Utility Window / Exit the Utility"
2. Click [CropCut Adjustment].
3. Click [Print and Cut Pattern].
The test pattern is printed.
4. Follow the on-screen instructions and enter the values for [New Scanning Value] and [New Feeding
Value].
5. Click [Apply].
The values in [New Scanning Value] and [New Feeding Value] change to "0."
6. Click [Close].
Performing Printing and Cutting Separately
Optimizing the Output Quality 51
To Next Page
Loading...
