About Periodical Cleaning Menus
There are four levels of cleaning for this machine. Perform the appropriate level of cleaning in accord-
ance with the ink type, the cleaning period, and the machine condition.
When using ECO-SOL MAX/ECO-SOL MAX 2 ink
Normal cleaning
Carry out a printing test. If nozzle drop-out occurs, perform cleaning.
P. 29 "Step 3: Printing Tests and Normal Cleaning"
Medium cleaning If nozzle drop-outs are not fixed by performing medium cleaning, perform powerful cleaning.
This consumes more ink than normal cleaning, and too-frequent use may damage the print
heads themselves. Avoid using it more than necessary.
P. 68 "Medium and Powerful Cleaning"
Powerful cleaning
Manual cleaning
We recommend that you perform this cleaning periodically. Replacing the wiper and felt wiper
is also an effective means of improving the symptoms.
P. 70 "Manual Cleaning"
When using ECO-SOL MAX 3 ink
Normal cleaning
Carry out a printing test. If nozzle drop-out occurs, perform cleaning.
P. 29 "Step 3: Printing Tests and Normal Cleaning"
Manual cleaning
[Clean the printer manually.] is displayed approximately once per week, but it may be dis-
played more frequently depending on the usage conditions. When this message is displayed,
be sure to perform manual cleaning.
P. 70 "Manual Cleaning"
Medium cleaning If nozzle drop-outs are not fixed by performing medium cleaning, perform powerful cleaning.
This consumes more ink than normal cleaning, and too-frequent use may damage the print
heads themselves. Avoid using it more than necessary.
P. 68 "Medium and Powerful Cleaning"
Powerful cleaning
Manual cleaning
Replacing the wiper and felt wiper is also an effective means of improving the symptoms.
P. 74 "Replacing the Wiper"
P. 75 "Replacing the Felt Wiper"
Periodical Cleaning Maintenance
Regular Maintenance 67
To Next Page
Loading...
