Medium and Powerful Cleaning
If dot drop-out is still found after Normal Cleaning, carry out the more powerful [Medium Cleaning] 2
or 3 times. If the condition is still not improved, carry out the even stronger [Powerful Cleaning]
MEMO
Each level of cleaning consumes more ink than the previous level. If these levels of cleaning are performed too often,
the print heads are likely to wear out; do not over clean at any level.
Procedure
1. Open the Utility window.
P. 11 "How to Open the Utility Window / Exit the Utility"
2. In the [Adjustment] tab, select [Medium Cleaning] and click [Go].
3. Click [Check Nozzle Condition]
4. Click [Test Print]
The test pattern is printed. Follow the on-screen instructions to check for nozzle clogging.
Periodical Cleaning Maintenance
68 Regular Maintenance
To Next Page
Loading...
