EasyManua.ls Logo

Roland VersaSTUDIO BN-20A - Installation Is Impossible; Windows 10; Windows 8.1

Roland VersaSTUDIO BN-20A
120 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
If installation quits partway through, or if the wizard does not appear when you make the connection
with a USB cable, take action as follows.
Windows 10
Procedure
1. If the [Found New Hardware] appears, click [Cancel] to close it.
2. Right-click the Start menu, and then click [Device Manager].
The [User Account Control] appears, click [Continue]. The [Device Manager] appears.
3. At the [View] menu, click [Show hidden devices].
4. In the list, find [Printers] or [Other devices], then double-click it. When the model name you are us-
ing or [Unknown device] appears below the item you selected, click it to choose it.
5. Go to the [Action] menu, and click [Uninstall].
6. In [Confirm Device Uninstall] window, click [OK]. Close the [Device Manager].
7. Disconnect the USB cable from the computer, and then restart Windows.
8. Uninstall the driver. Carry out the steps from step 3 in "Uninstalling the Driver Windows 10" to unin-
stall the driver.
P. 99 "Uninstalling the Driver"
9. Install the driver again according to "Preparation Before Use.”
Windows 8.1
Procedure
1. Use a USB cable to connect the machine and the PC, and then turn the machine on.
2. If the [Found New Hardware] wizard appears, click [Settings] to close it.
Disconnect any USB cables for printers other than this machine.
3. Click [Desk top].
4. Move the mouse to the lower right corner to display Charm and click [Settings] .
5. Click [PC Info].
6. Click [Device Manager] . When the [User Account Control] screen appears, click [Continue].
The [Device Manager] appears.
7. Click [Show hidden devices] on the [View] menu.
8. Double-click [Printers] or [Other devices] in the list. Click the model name or [Unknown device],
whichever appears below the item you selected.
9. Click [Uninstall] on the [Action] menu.
10. In the [Confirm Device Uninstall] dialog box, click [OK] to close [Device Manager].
11. Disconnect the USB cable that is connected to the printer, and then restart Windows.
12. Uninstall the driver.
Carry out the steps from step 3 in “Uninstall the Driver Windows 8.1” to uninstall the driver.
P. 99 "Uninstalling the Driver"
Installation is impossible
Driver Problems 97

Table of Contents

Related product manuals