EasyManua.ls Logo

Roland VersaStudio BT-12 - When Not Using for a Long Period of Time

Roland VersaStudio BT-12
234 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
180
8.Maintenance
WhenNotUsingforaLongPeriodofTime
Ifyoudonotusethemachineforalongtime,ensurethefollowing:
Cleantheinternalcompartmentsusingthededicatedcleaningcartridgeinadvance.Forthe
cleaningmethod,seepage118"CleanInternals".
Oncetheinternalcompartmentsarecleaned,turnthemachinepoweroff,disconnectthe
USBcableorEthernetcable,andthenunplugitfromthewalloutlet.
Itisrecommendedtoprintatleastonceamonth,becausethemachineconsumesaconsiderable
amountofinkforperiodicmaintenanceandprintheadcleaningwhenturnedonafteralong
periodofinactivity.
Becarefulofthefollowing:
Thenozzlesoftheprintheadsmaydryoutandbecomeclogged.Topreventthis,periodically
printsomething.Evenifyoudonotprintanything,turnthemachineonforafewminutes
onceevery20‐25days.
If you do not use the machine for a long period of time, alwayscheckifthenozzlesare
cloggedbyprintinganozzlechecktestpattern.Seepage99"NozzleCheck".Cleantheprint
headsasnecessary,andthenbeginprinting.Seepage101"Head‐cleaning".
Ifyoutrytousethemachineafterithasbeenoutofuseforalongtime,it may not print
properlyevenifheadcleaningiscarriedoutseveraltimes.Ifthisisthecase,carryouthead
flushing.Seepage102"Head‐flushing".Iftheprintheadsarestillclogged,leavethemachine
forabouttenminutes,andthenprintthenozzlecheckpattern.Iftheproblempersists,turn
themachineoffandleaveitforatleasteighthours.Thisshouldunclogtheprintheads.
After head cleaning is performed multiple times, clogged ink will dissolve over time, and
normalprintingmaybecomepossible.
Ifthereisnoimprovementafterperformingthestepsabove,contactauthorizedRolandDG
Corporationdealer.
Whendisconnectingthepowercordfromthewalloutlet,alwayspulltheplug,notthe
cord.Pullingthecordcandamagethepowercord.Useofdamagedpowercordscould
resultinfireorelectricshock.
Ifthismachineisnotgoingtobeusedforseveraldaysorlongeratatime,disconnectits
powercordfromthewalloutlet.

Table of Contents

Other manuals for Roland VersaStudio BT-12

Related product manuals