Roland VersaStudio BT-12 - No Tray; Garment Misfeed; Garment Size Mismatch; Cover Open

209
StatusMonitorErrors

NoTray
Thetrayisnotinstalledorisincorrectlyinstalled.
Resolvetheerrorusinganyofthefollowingprocedures:
• Loadthetray.
Seepage73"LoadingaT‐shirtintheTray".
• Removethetray.
Pressthe[Tray]keyandremovethetray,andthenresetthetray
• Cancelprinting.
Seepage86"CancelingPrinting".
GarmentMisfeed
Thefabricortrayisincorrectlyinstalled.Alternatively,afabricorforeignobjectmaybestuck
insidethemachine.
Resolvetheerrorusinganyofthefollowingprocedures:
• Loadthefabricortraycorrectly.
Seepage58"LoadingFabrics".
• Adjusttheheightofthetray.
Seepage189"AdjustingtheHeightoftheTray".
• Removethefabricorforeignobject.
Seepage193"RemovingaFabricorForeignObjectbyOpeningtheTopCover".

GarmentSizeMismatch
Thetrayofthespecifiedsizeortypeisnotloaded.
Resolvetheerrorusinganyofthefollowingprocedures:
• Changetheprintingsize.
• Cancelprinting.
Seepage86"CancelingPrinting".
CoverOpen
Thetoporrightfrontcoverisopen.
Closethecover.
Ifthesecoversareclosed,openandcloseeachofthemagain.