Roland VersaStudio BT-12 - Removing Dust and Flattening Fibers

72
3.PrintingonT‐shirts
RemovingDustandFlatteningFibers
ThisprocessistoprintonT‐shirtsclearly.Theoptionalfinisherisused.

• AstheA4standardtray,A5tray,andSleeve&SocksTraybecomeshotwhencontinuously
usedontheoptionalfinisher,giveanintervaloffiveminutesorlongertosetthemafter
theyarepulledout.
• Donotprintonwetfabric.Doingsomayresultinablurryimage.
• Donotusethespray.IfyouwettheT‐shirtwiththespray,thecolorofthetraymaystain
thebackoftheT‐shirt.
• Inhightemperatureenvironments,fabricmightabsorbmoistureandstretchafter
smoothed.Printimmediatelyafterloadingthefabric.
• Removedustandlintfromfabricbeforeprintingbecausedustandlintwhosecoloristhe
samewiththefabriccolorarehardtofind,werecommendusingalintrollertoremove
dustandlintfromfabricbeforesmoothingit.
1.
RemovedustandlintfromtheprintsurfaceoftheT‐shirt.
Removethemwithalintbrushforclothesoraroller.
2.
UsethefinishertoflattenfibersandremovewrinklesfromtheT‐shirt.

• Whenusingthefinisher,youcancarryoutheatpressprocessingfortheT‐shirtloadedinthe
A4standardtray,A5tray,orSleeve&SocksTray.
