Roland VersaStudio BT-12 - Maintenance Procedures

96
5.MachineSetupMenus
Usingthe[List/TestPrint]Menu
Usethe[List/TestPrint]menutocheckthatthemachineisworkingproperlyandtoalsocheckthe
machine'ssystemconfigurationandsettings.
Config.Page
Youcanprintthecurrentconfigurationofthemachine.
ColorDemoPage
Youcanprintcolorsamples.
ErrorLog
Youcanprinterrorlogs.
PrintingaConfigurationPage
1.
Loadthefabricinthetray.
2.
Pressthe[ /Menu]key.

3.
Pressthe[ ]or[ /Menu]keytodisplay[List/TestPrint],andthenpressthe
[#Enter]key.

4.
Pressthe[ ]or[ /Menu]keytodisplay[Config.Page],andthenpressthe
[#Enter]key.

5.
Pressthe[Start]key.
Theconfigurationpageisprinted.
6.
Setanotherfabric.
7.
PrintallconfigurationpagesbyrepeatingSteps5and6.
8.
Pressthe[Escape]key.
<List/TestPrint
Config.Page
<Menu>
List/TestPrint