Roland VG-99 - Wah Effect Parameters

122
Chapter 9 Parameters Guide FX (Effects)
WAH
You can control the wah effect in real time by adjusting the EXP
pedal connected to the EXP PEDAL jack or FC-300 EXP pedal.
*1 Setting available when TYPE is set to CUSTOM.
Parameter/
Range
Explanation
WAH SW
OFF, ON
Turns the WAH effect on/off.
TYPE
Selects the type of wah.
CRY WAH This models the sound of the CRY BABY
wah pedal popular in the `70s.
VO WAH This models the sound of the VOX V846.
FAT WAH This a wah sound featuring a bold tone.
LIGHT WAH This wah has a refined sound with no un-
usual characteristics.
7STR WAH This expanded wah features a variable
range compatible with seven-string and bar-
itone guitars.
RESO WAH This completely original effect offers en-
hancements on the characteristic resonances
produced by analog synth filters.
CUSTOM Custom wah
PEDAL POS (Pedal Position)
0–100 Adjusts the position of the wah pedal.
* This expanded wah features a variable range
compatible with seven-string and baritone
guitars.
LEVEL
0–100 Adjusts the volume.
Parameter/
Range
Explanation
CUSTOM *1
TYPE
This selects the basic sound when the TYPE parameter is set to
CUSTOM.
CRY WAH This models the sound of the CRY BABY
wah pedal popular in the `70s.
VO WAH This models the sound of the VOX V846.
FAT WAH This a wah sound featuring a bold tone.
LIGHT WAH This wah has a refined smooth sound.
7STR WAH Wah featuring a broader range of variations
for the seven-string guitar.
Q
-50–+50
Adjusts the amount of characteristic effect
applied to the wah tone.
RANGE LOW
-50–+50
Selects the tone produced when the pedal is
back.
RANGE HIGH
-50–+50
Selects the tone produced when the pedal is
forward.
PRESENCE
-50–+50
Adjusts the tonal quality of the wah effect.
VG-99_e.book 122 ページ ２００７年７月５日 木曜日 午前９時２２分