Roland VR-3 - Device Component Identification

10
MIDI Implementations
❍Effect Control 1 (Controller Number 12)
Status 2nd Byte 3rd Byte
———- ——— ———
BnH 0CH vvH
* This controls [3] slider of the audio mixer.
❍Effect Control 2 (Controller Number 13)
Status 2nd Byte 3rd Byte
———- ——— ———
BnH 0DH vvH
* This controls [4] slider of the audio mixer.
❍Undefined (Controller Number 14)
Status 2nd Byte 3rd Byte
———- ——— ———
BnH 0EH vvH
* This controls [5/6] slider of the audio mixer.
❍Undefined (Controller Number 15)
Status 2nd Byte 3rd Byte
———- ——— ———
BnH 0FH vvH
* This controls [7/8] dial of the audio mixer.
❍General Purpose Controllers 1 (Controller Number 16)
Status 2nd Byte 3rd Byte
———- ——— ———
BnH 10H vvH
* This controls [INTERNAL MIC LEVEL] dial of the audio mixer.
❍General Purpose Controllers 2 (Controller Number 17)
Status 2nd Byte 3rd Byte
———- ——— ———
BnH 11H vvH
* This controls [MASTER] slider of the audio mixer.
❍General Purpose Controllers 3 (Controller Number 18)
Status 2nd Byte 3rd Byte
———- ——— ———
BnH 12H vvH
* This controls [USB LEVEL] dial of the audio mixer.
❍General Purpose Controllers4 (Controller Number 19)
Status 2nd Byte 3rd Byte
———- ——— ———
BnH 13H ttH
tt = Transition Select : 00H - 02H (CUT, MIX, WIPE)
* This selects the type of transition effect.
❍Undefined (Controller Number 20)
Status 2nd Byte 3rd Byte
———- ——— ———
BnH 14H vvH
* This adjusts the transition time.