Roland VR-3 - 2 MIDI Messages Transmitted from MIDI out; Transmission of the Received Messages; Transmission of the Generated Messages

18
MIDI Implementations
When COM:MIDI OUT is [THRU], this unit transmits the received messages.
When COM:MIDI OUT is [OUT], this unit generates and transmits the messages as below.
■ Channel Voice Messages
● Note Off
Status 2nd Byte 3rd Byte
———- ——— ———
8nH kkH 40H
* Transmits the same note number when note on is transmitted.
● Note On
Status 2nd Byte 3rd Byte
———- ——— ———
9nH kkH 40H
* Transmits when [AR] is selected as VIDEO SEL TYPE.
* When video switching is performed, note number is transmitted after program change.
* For corresponding combination of bank select/program change and the video channels, refer to “STD:VIDEO SEL TYPE” (p. 4).
● Control Change
❍Bank Select (Controller Number 0,32)
Status 2nd Byte 3rd Byte
———- ——— ———
BnH 00H mmH
BnH 20H llH
mm,ll = Bank Number : 00 00H, 01 00H (bank.1, bank.2)
* Transmits when [VLINK] is selected as VIDEO SEL TYPE.
* When video switching is performed, bank number is transmitted prior to program change.
* For corresponding combination of bank select/program change and the video channels, refer to “STD:VIDEO SEL TYPE” (p. 4).
❍Panpot (Controller Number 10)
Status 2nd Byte 3rd Byte
———- ——— ———
BnH 0AH vvH
* Transmits value when [1] slider of the audio mixer is controlled.
❍Expression (Controller Number 11)
Status 2nd Byte 3rd Byte
———- ——— ———
BnH 0BH vvH
* Transmits value when [2] slider of the audio mixer is controlled.
❍Effect Control 1 (Controller Number 12)
Status 2nd Byte 3rd Byte
———- ——— ———
BnH 0CH vvH
* Transmits value when [3] slider of the audio mixer is controlled.
2. MIDI Messages Transmitted from MIDI OUT
2-1. Transmission of the Received Messages
2-2. Transmission of the Generated Messages