EasyManua.ls Logo

Roland VR-3 - Parameter Address Map; MIDI Visual Control

Roland VR-3
25 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
21
MIDI Implementations
Start Address Description
10H 00H 00H System Preference Area (See 3-1-1)
10H 10H 00H Clip Control Assignment Area (See 3-1-2)
10H 20H 00H Effect Control Assignment Area (See 3-1-3)
10H 30H 00H Clip Control Preference Area (See 3-1-4)
* The MVC messages received during MVC OFF status (: while the unit is in standard mode or V-LINK mode) will be ignored. However, only the
MVC ON message will be received.
* The remote control mode of the unit will be switched to standard mode when MVC OFF message is received.
* If the unit receives MVC ON after V-LINK ON, the remote control mode switches to MVC mode.
* The parameter setting changed using MVC messages will not be saved to the internal memory.
* The default values of MVC are as below.
Parameters Assign Value/Status
Clip Control Ch. - 1
Color Control Ch. - 1
Note Control - OFF
Transition Time CC#05 0
Keyboard Range Lower - 36
Keyboard Range Upper - 84
* At the addresses remarked with [#] mark, the data will be divided into 2 bytes : upper nibble (upper 4 bits) and lower nibble (lower 4 bits).
Example) The data to transmit is BCH, 0BH is transmitted as first byte and then 0CH is transmitted as next byte. In case of reception, the unit
ignores if 2 bytes are not received together.
3-1-1. System Preference Area
Address Parameter Name Sys.Ex.Value Meaning of Value
10H 00H 00H MIDI Visual Control ON/OFF 00H - 01H OFF, ON
10H 00H 01H Clip Control Rx MIDI Ch. 00H - 10H 1 - 16 Ch., OFF
10H 00H 02H Effect Control Rx MIDI Ch. 00H - 10H 1 - 16 Ch., OFF
10H 00H 03H Note Mode Enabled 00H - 01H OFF, ON
3-1-2. Clip Control Assignment Area
Address Parameter Name Sys.Ex.Value Meaning of Value
#10H 10H 02H Dissolve Time Ctrl Assign 01H-1FH, Transition Time : Control Change,
40H-5FH,D0H,E0H,FFH After touch, Pitch Bend, OFF
3-1-3. Effect Control Assignment Area
Address Parameter Name Sys.Ex.Value Meaning of Value
3-1-4. Clip Control Preference Area
Address Parameter Name Sys.Ex.Value Meaning of Value
10H 30H 02H Keyboard Range Lower 00H - 7FH Note Number
10H 30H 03H Keyboard Range Upper 00H - 7FH Note Number
Parameter Address Map
3-1. MIDI Visual Control

Other manuals for Roland VR-3

Related product manuals