35
Enhancements related to operation
1. Press [PLAY (DISPLAY)].
2. Hold down [SHIFT] and press [F2 (TRACK)].
3. Press [F1 (Tr/Ph)] so that the Phrase Edit menu appears.
4. Press [PAGE] so that [F2] indicates “Split,” and then
press [F2 (Split)].
fig.6-15
5. Press [F1 (SelPh)].
6. Press the [STATUS] button of the phrase that you wish to
split. The STATUS indicator will light in red.
Alternatively, you can use [ ][ ][ ][ ] to
move the cursor to the phrase that you wish to split, and
press [F3 (MARK)] or [YES].
MEMO
By pressing [F2 (ALL)] you can mark or unmark all phrases
simultaneously.
fig.6-16_70
7. Press [F1 (Back)].
8. Use [ ][ ][ ][ ] to move the cursor, and use
the TIME/VALUE dial to set the parameters.
fig.6-23
Type
Select how the phrase will be divided. In this case, select
“Split.”
Divide: Automatically divide the phrase into two or
more phrases.
Split: Manually divide the phrase into two parts (the
same as Ver. 1.00).
To (to point)
Specify the time location at which the phrase will be split.
9. Press [F4 (Exec].
10. When the display indicates “Complete,” press
[PLAY (DISPLAY)]. You will return to Play condition.
Using the MONITOR knob to
adjust the pan
(MONITOR knob +[SELECT])
You can use the MONITOR knob to directly adjust the pan
(or balance) of the specified channel.
1. Press [PLAY (DISPLAY)].
2. Hold down the [SELECT (CH EDIT)] button for the
channel whose pan you wish to adjust, and adjust the
MONITOR knob.
fig.6-24
To Next Page
Loading...
