244
Chapter 21 System and Global Settings
fig.12-17
1. Hold [SHIFT] and press [F5 (SYSTEM)]. The System
Menu icon is displayed. If the System Menu icon does
not appear, press [F6 (EXIT)].
2. Press [F1 (SYSPM)]. If “SYSPM” does not appear above
[F1], first press [PAGE] until “SYSPM” appears, and then
press [F1 (SYSPM)].
3. Use [ ], [ ], [ ], and [ ] to move the
cursor to “Remain Display.” If “Remain Display” is not
displayed, press [F1 (Prm1)].
4. Use the TIME/VALUE dial to change the setting for the
Remain Display.
Remain Display (Remaining Display)
This selects the units of measurements in which the
remaining drive space is shown.
Time:
The remaining time for recording is shown in minutes
and seconds.
CapaMB:
The remaining time for recording is shown in available
megabytes of drive space.
Capa %:
The remaining time for recording is shown as a
percentage of total drive space.
Event:
This shows the remaining number of events available for
recording and mixing.
5. Press [PLAY (DISPLAY)] to return to the Playlist display.
Foot Switch Settings
You can choose how the foot switch functions when an
optional foot switch—such as the Roland DP-2 or BOSS FS-
5U—is connected to the FOOT SWITCH jack.
1. Hold [SHIFT] and press [F5 (SYSTEM)]. The System
Menu icon is displayed. If the System Menu icon does
not appear, press [F6 (EXIT)].
2. Press [F1 (SYSPM)]. If “SYSPM” does not appear above
[F1], first press [PAGE] until “SYSPM” appears, and then
press [F1 (SYSPM)].
3. Use [ ], [ ], [ ], and [ ] to move the
cursor to “Foot Sw.” If “Foot Sw” is not displayed, press
[F1 (Prm1)].
4. Use the TIME/VALUE dial to change the setting for Foot
Switch.
Play/Stop:
Repeats playback and stop each time the foot switch is
pressed.
Record:
Performs the same function as [REC]. Use this setting for
performing punch-ins and -outs using a foot switch.
TapMarker:
Performs the same function as [TAP]. Pressing the foot
switch places a marker at the current position of the
song.
Next:
Performs the same function as [NEXT]. Moves to the
beginning or end of the next phrase each time the foot
switch is pressed.
Previous:
Performs the same function as [PREVIOUS]. Moves to
the beginning or end of the previous phrase each time
the foot switch is pressed.
GPI:
Controls playback and recording of the song depending
on the GPI trigger signal received from the FOOT
SWITCH jack.
GPI (See Appendices, p. 63)
5. Press [PLAY (DISPLAY)] to return to the Playlist display.
To Next Page
Loading...
