System Parameter
Parameter name Display Value Initial value
Master clock Master Clock DIGIN1, INT, DIGIN2 INT
Time Display Format Time Display Format ABS, REL ABS
Offset Offset 00h00m00s00–23h59m59s29 00h00m00s00 (*)
Fader Match Fader Match Null, Jump Jump
Undo Message UNDO Message Off, On On
Peak Hold Switch Peak Hold Sw Off, On Off
Scene Mode Scene Mode All, KeepF All
Remaining Display Remain Display Time, CapaMB, Capa %, Event Time
Foot Switch Assign Foot Sw Play/Stop, Record, TapMarker, Play/Stop
Next, Previous, GPI
Digital Copy Protect Switch Digital Copy Protect Off, On Off
* The settable value for Offset will change slightly depending on the MTC type.
Global Parameter
Parameter name Display Value Initial value
IDE Drive IDE Drive Off, On On
SCSI Self ID SCSI Self ID 0–7 7
Shift Lock Shift Lock Off, On Off
Measure Display Measure Display Always, Auto Always
Numerics Type NUMERICS Type Up, Down Up
Previous/Next Switch PREVIOUS/NEXT Sw PHRASE, MARKER PHRASE
Input Peak Level Input Peak Level CLIP, -3 dB, -6 dB -6 dB
Switching Time Switching Time 0.3–2.0 s 0.5 s
CD Digital Recording Switch CD Digital REC Off, On Off
Fan Control Fan Control Off, Play, Rec&Play Off
Play/Rec Parameter
Parameter name Display Value Initial value
Record Monitor Record Monitor AUTO, SOURCE AUTO
Marker Stop Marker Stop Off, On Off
Vari Pitch Vari Pitch 22.05–50.43 kHz (44.1 kHz) 44.10 kHz
22.05–50.41 kHz (32 kHz) 32.00 kHz
22.00–50.48 kHz (48 kHz) 48.00 kHz
Fade Length Fade Length 2, 10, 20, 30, 40, 50 ms 10 ms
Scrub Length Scrub Length 25–100 ms 70 ms
Preview To Length PREVIEW TO Length 1.0–10.0 s 1.0 s
Preview From Length PREVIEW FROM Length 1.0–10.0 s 1.0 s
Parameter List
22
To Next Page
Loading...
