26
'Expands the functionality of the VS-1680
Simply by installing the VS8F-2 into the VS-1680, high quality stereo
effects become accessible for convenient use.
'Two stereo effect systems
The VS8F-2 has two stereo effect systems. Each effect can be
connected to the effect buss or inserted into a specific channel.
This means that you can, for example, insert one effect into a specific
channel, and connect the other effect to the send/return of the mixer.
'A varied selection of effects
200 Preset Patches (effect settings) and 210 User Patches are
provided.
You can instantly switch between a variety of effects simply by selecting
a Patch.
Original effects settings that you create can be saved as a User Patch.
They can also be saved as part of the mixer settings in a Scene.
'Algorithms
The VS8F-2 provided not only basic effects such as reverb and delay,
but also effects ideal for vocals and guitar, and even special effects
such as vocoder and RSS.
The way in which each of these effects is organized internally is
determined by which of the 34 algorithms it uses.
This means that you can simply select an algorithm (Patch) and begin
creating the sound you want, without having to worry about how to
make connections.
SPECIFICATIONS (VS8F-2)
1.Turn off the power of the VS-1680 and the connected devices, and
disconnect all cables that are connected to the VS-1680.
2.Turn the VS-1680 over, and remove the bottom cover. Inside is the
connector and three plastic pins.
Insert the connector of the VS8F-2 into the internal connector and at the
same time make sure the plastic pins go into the holes in the VS8F-2,
so that the board is firmly in place.
3.Re-attach the cover.
4.Connect the external equipment to the VS-1680, and tun on the VS-
1680 power.
INSTALLING THE VS8F-2
VS8F-2
Sep, 1998
VS-1680
To Next Page
Loading...
