Roland VS-2000 Supplementary Guide

Demo Project with Harmony
On demo project “WITH ME,” you can listen to the back ground chorus on the
original vocal. You can listen to this when scene08 (”HARMONY FX”) is loaded.
The back ground chorus is created from original vocal changing its pitch.
Back ground chorus of scene 08 is created on VS-2000. You can compare with
human back ground chorus contained in scene 07 (“Deflt Mix”).
1
Select project “WITH ME” as current project.
For details, see “Loading a project” on Owner’s Manual p. 101.
2
Hold down SHIFT and press LOCATOR•SCENE so it lights red.
3
Press TRACK/STATUS 8 to load scene 08. Scene 08 contains harmony
effect settings.
4
Press PLAY to start playback.
For details, see “Starting playback of the Demo” on Owner’s Manual p. 77.
03566990 ’03-12-2KS

Roland VS-2000 Specifications

General

Type	Digital Audio Workstation
A/D/A Conversion	24-bit
MIDI	MIDI In/Out
Simultaneous Recording Tracks	8
Sampling Frequency	44.1kHz, 48kHz
Effects	Built-in effects including reverb, delay, chorus, and more
Inputs	8 XLR/TRS combo inputs, 2 RCA inputs
Outputs	2 RCA outputs, headphone output
Storage	Internal hard drive (40GB), optional CD-RW drive
Display	LCD