32
Parameter List
Global Parameter [SHIFT]+[F4 (UTILITY)]
→
[(Page1) F2 (GLOBAL)]
Project Parameter [SHIFT]+[F4 (UTILITY)]
→
[(Page1) F3 (Proj)]
* The settable value for Offset will change slightly depending on the MTC type.
Parameter name Display Value,
Initial value
Input Peak Level INPUT PEAK LEVEL 0 dB, -3 dB,
-6 dB
Foot Switch Assign
FOOT SWITCH ASSIGN
Play/Stop
, Record, TapMarker, Next, Previous, GPI
CD Digital Recording CD DIGITAL REC
Off
, On
Screen Saver SCREEN SAVER
Off
, 1–30 min
Shift Lock SHIFT LOCK
Off
, On, Once
Switching Time SWITCHING TIME 0.3–
0.5
–2.0 sec
Locator/Scene Type LOCATOR/SCENE TYPE Safe,
Quick
Previous/Next Switch
PREVIOUS/NEXT Sw
PHRASE
, MARKER
Return to Locate Switch RETURN TO LOCATE Sw Off,
On
Numerics Type
NUMERICS TYPE
Up
, Down
Edit Point Switch Type EDIT POINT Sw TYPE
OVERWRITE
, Same as LOCATOR
Undo Message UNDO MESSAGE Off,
On
Edit Message EDIT MESSAGE Off,
On
Grid Mode
GRID MODE
Only TO
, ALL EDIT POINT
Date/Remain Switch DATE/REMAIN Sw
Date
, Remain
Remaining Display Type REMAIN DISP TYPE
Time
, CapaMB, Capa %, Event
Parameter name Display Value,
Initial value
Master Clock MASTER CLOCK
INT
, R-BUS, DIGITAL IN (SELECT=COAXIAL, OPTICAL),
EXT TIME CODE (Sync=MIDI IN, R-BUS)
Dither DITHER
Off
, 24bit, 23bit, ... , 8bit
Digital Copy Protect DIGITAL COPY PROTECT
Off
, On
Digital in Select DIGITAL IN SELECT
COAXIAL
, OPTICAL
Display Offset Time DISPLAY OFFSET TIME
00:00:00:00.00
–23:59:59:29.99 (*)
Time Display Format TIME DISPLAY FORMAT
ABS
, REL
Peak Hold Switch PEAK HOLD Sw
Off
, On
2400_app_e.book 32 ページ ２００５年４月２８日 木曜日 午後１時１４分
To Next Page
Loading...
