Roland VS-2400CD - Page 38

38
Parameter List
RSS PAN Setup [SHIFT]+[F4 (UTILITY)] → [(Page4) F2 (RSSPan)]
*1 When an effect board is being used by the analyzer, it’s unavailable for other use.
*2 If Channel Link is On, its channels will not appear in Use Channel List.
Project New [SHIFT]+[F1 (PROJECT)] → [(Page1) F2 (NEW)]
* A new number which is not designated to the projects which are already stored is allocated to 000.
Project Protect [SHIFT]+[F1 (PROJECT)] → [(Page1) F4 (PROTEC)]
Format Drive [SHIFT]+[F1 (PROJECT)] → [(Page4) F2 (FmtDrv)]
Clear Partition [SHIFT]+[F1 (PROJECT)] → [(Page4) F3 (ClrPrt)]
Parameter name Display Value, Initial value
Use Effect Board Use EFFECT Board Off , A, B (*1)
Phones Mode PHONES Sw
Off , On
Use Channel List Use CHANNEL LIST INPUT 1–INPUT16 (*2), TRACK 1–TRACK24 (*2)
Parameter name Display Value, Initial value
Project Name NAME InitProj 000 (*)
Copy Utility Parameter Copy Utility Prm
Off , On
Copy Mixer/Scene Parameter Copy Mixer/Scene Prm Off , On
Sample Rate Sample Rate 96k, 88.2k, 64k, 48k, 44.1k , 32k
Recording Mode Recording Mode M24, MTP , CDR, M16, MT1, MT2, LIV, LV2
Parameter name Display Value, Initial value
Project Protect - Off , On
Parameter name Display Value, Initial value
Partition Size Partition Size 500 MB, 1 GB (1000 MB), 2 GB (2000 MB), 10GB
Physical Format
Physical Format
Off(Quick) , On
Surface Scan SurfaceScan Off , On
Parameter name Display Value, Initial value
Surface Scan SurfaceScan Off , On
2400_app_e.book 38 ページ ２００５年４月２８日 木曜日 午後１時１４分