58
Algorithm List
Multi Tap Delay
This is a Delay feature that can set 10 delay sounds separately.
fig.08-45
Parameter (full name) Setting Function
MTD (Multi-Tap Delay): Issues 10 delay sounds separately.
Time Ch1 – Ch10 (Delay Time 1 – 10) 0–1200 ms Sets the time from the direct sound until when the delay
sound for channels 1–10 is heard.
Level Ch1 – Ch10 (Delay Level 1 – 10) 0–100 Sets the volumes of delay sounds for channels 1–10.
Pan Ch1 – Ch10 (Pan 1 – 10) L63–R63 Sets the pan of the delay sounds for channels 1–10.
FBTim (Feedback Delay Time)
0–1200 ms Sets the repetition frequency for feedback.
FBLvl (Feedback Level) -100–100 Sets the amount of the delay sound should be returned to
the delay input.
FX Lvl (Effect Level). -100–100 Sets the volume of the delay sound.
DirLvl (Direct Level) -100–100 Sets the volume of the direct sound.
Input R
Output R
Multi Tap Delay
3BAND EQ
3BAND EQ
Pan 1
Pan 2
Pan 10
Feedback Level
Diret Level
Diret Level
Input L
Output L
2400_app_e.book 58 ページ ２００５年４月２８日 木曜日 午後１時１４分
To Next Page
Loading...
