Roland VS-2400CD - Export

7—Project and Drive Operations
Roland VS-2400CD Owner’s Manual www.RolandUS.com 105
EXPORT
You can export the current project from the VS-2400CD so that it can be played on the:
• VS-880 • VS-880EX • VSR-880
• VS-890 • VS-1680 • VS-1880
• VS-2480/VS-2480CD
How Export Works
This section describes how the currently loaded VS-2400CD project is translated for
export to the various V-Studios. In all cases, when you export a VS-2400CD project, the
newly created song uses the project’s sample rate and recording mode.
You can export a project to CD-R/RW as a song archive for earlier V-Studios and as a
backup for the VS-2480/VS-2480CD.
Exporting to a VS-880 or VS-880EX
• Eight project tracks are exported. You can select Tracks 1-8, 9-16 or 17-24.
• Only V-Tracks 1-8 are exported to VS-880 songs—to export data on V-Tracks 9-16,
copy the data to V-Tracks 1-8. In VS-880EX songs, the VS-2400CD’s V-Tracks 1-8 are
exported to Bank A, and V-Tracks 9-16 to Bank B.
• Only the project’s Locators 00-31 are exported.
• Projects that use the M24, MTP, CDR and LV2 recording modes can’t be exported as
VS-880 or VS-880EX songs.
Exporting to a VS-890 or VSR-880
• Eight project tracks are exported. You can select Tracks 1-8, 9-16 or 17-24.
• V-Tracks 1-8 are exported to Bank A, and V-Tracks 9-16 to Bank B.
• Projects that use the M24 and LV2 recording modes can’t be exported as VS-890 or
VSR-880 songs.
• MTP-recorded project data is converted to VSR mode during export—this process
can take a while.
Exporting to a VS-1680
• 16 project tracks are exported. You can select Tracks 1-16 or 9-24.
• Only the project’s Locators 00-63 are exported.
• Projects that use the M24 and CDR recording modes can’t be exported as VS-1680
songs, nor can projects that contain CDR mastering tracks—see Page 332.
Exporting to a VS-1880
• 18 project tracks are exported. You can select Tracks 1-18 or 7-24.
• Only the project’s Locators 00-63 are exported.
• Projects that use the M24 recording mode can’t be exported as VS-1880 songs.
The VS-2400CD won’t export a project directly to the VS-840’s data format. You can
export a project as VS-880 data, and use the VS-840’s Song Convert feature to load the
data.
The VS-2400CD’s M16 recording mode is the same as the MAS mode in the VS-880,
VS-880EX, VSR-880, VS-890, VS-1680 and VS-1880. The VS-2400CD’s M16 recording
mode is identical to the one in the VS-2480 and VS-2480CD.
VS2400OMUS.book 105 ページ ２００６年２月２８日 火曜日 午前１１時１２分