29—Using a VGA Monitor: Overview
Roland VS-2400CD Owner’s Manual www.RolandUS.com 383
Some of these areas are always available and some change, as described later:
•
Menus, control bar, F buttons, status strip and remaining space status strip
—are always
visible on the VGA. See Chapter 30.
•
PAN knob strip and clipping indicators
—are always visible on the VGA. See Chapter
30.
•
The meters strip
—shows the currently selected level meters. See Chapter 31.
•
Content pane
—the contents of this area change as described in Chapters 31-35.
The VGA’s Main Display Home Screen
Like the LCD, the VGA main display has its own Home screen, shown on
the previous page. You can return to the Home screen at any time by
clicking the HOME button in the upper right-hand corner of the display (as
shown on Page 382), the HOME•DISPLAY button on the VS-2400CD or the
Home button on your keyboard.
Button Colors on the VGA Main Display
The VGA contains a wide assortment of on/off switches,
presented as clickable buttons. Unless otherwise noted,
when a button is switched on, it turns yellow—when it’s
off, it’s gray.
The transport REC button and the Mastering Room and
Automix Record buttons behave a little differently: they
turn red when activated.
Interaction with the VS-2400CD’s Top-Panel Controls
The VS-2400CD’s top-panel buttons generally interact with the currently selected main
display as described in Chapters 1-28. When the VGA is selected as the main display,
however, there are a few minor differences:
• Press the PROJECT, TRACK, EFFECT or UTILITY MENU F buttons on the
VS-2400CD to display the corresponding menu on the VGA. To close a menu, press
EXIT/NO.
• The FADER buttons—IN 1-12, IN 13-16, Tr 1-12, TR 13-24, AUX 1-8/FX 1-4
(Page 133)—choose the channels to which the main display’s PAN knob strip is
assigned (Page 395). In the VGA’s Multi Channel Strip View screen, the FADER
buttons select the channels to be displayed.
• The Home screen’s fader/ pan buttons determine what’s displayed in the lower
part of the screen. Press:
•
IN F/P
—to display the Input Mixer and Master Block.
•
TR F/P
—to display the Track Mixer and FX Return Mixer.
•
MltChv
—to display the Multi Channel Strip View of the currently selected
channels.
Sub-Windows
In some cases, when you click a button on the VGA main display or select a menu item,
a window opens that looks just like the corresponding screen on the VS-2400CD’s LCD,
with the same F buttons available at the bottom of the window. The contents of the
window behave the same way they do on the VS-2400CD’s LCD. You can exit the screen
by clicking the box in its upper-left corner or by pressing F6 (EXIT).
Off
On
Off
On
Gray
Yellow
Gray
Red
VS2400OMUS.book 383 ページ ２００６年２月２８日 火曜日 午前１１時１２分
To Next Page
Loading...
