34—VGA Main Display EZ ROUTING Screen
440 www.RolandUS.com Roland VS-2400CD Owner’s Manual
Other Onscreen EZ ROUTING Tools
Phantom Power Switches
You can turn on phantom power (Page 126) to any of the XLR input jacks by clicking its
button in the PATCH BAY pane so the button lights. To turn off phantom power, click
the button again so its light goes out.
Activating Digital Inputs
The VS-2400CD can receive up to 10 digital input signals at a time. The R-BUS
connections are always active. You can activate the desired stereo coaxial or optical
digital inputs as described on Page 127.
On the VGA, every possible combination is represented by a digital input selector
button in the PATCH BAY pane. Each currently selected digital connection turns white
to show that it’s activated and available for use.
Recording Bus Attenuation
The REC BUS ATT knob in the OUTPUT ASSIGN pane allows you to adjust
your listening level when you’re directly monitoring the 16 recording busses,
as described on Page 273.
You can jump to the first phantom power button by holding down SHIFT and pressing
EZ ROUTING•PHANTOM.
On
In this illustration, you can see that
the coaxial digital inputs are active, and
that the optical digital inputs are not.
VS2400OMUS.book 440 ページ ２００６年２月２８日 火曜日 午前１１時１２分
To Next Page
Loading...
